Skip to main content


(11 reviews)

Out of stock

The xPRO V5 is the most advanced GRBL based motion controller in the World!  Our plug and play xPRO V5 brings you the advanced stepping and power of Trianamic drivers along with Wifi and USB interfaces, all powered by a 32 bit processor and wrapped in a beautiful ABS case (with integrated cooling). 

 Introducing the all new XPRO V5:

  • High Power 6A stepper drivers based on the Trinamic TMC5160
  • Sleek Web Interface with cut-from-SD capability (SD card included)
  • USB-C interface work with GRBL sender programs
  • Built-in Heatsink & Temperature Controlled Cooling Fan
  • Fully assembled in a custom ABS case
  • VFD support - PWM, 0-10V, and RS485 
  • Laser support - PWM, 0-5V, 0-10V
  • XYZ Probe input
  • Integrated relay 
  • Safety Door/Estop switch terminal
  • Integrated power switch 
  • 4 software defined, independent motor drivers can:
    • Clone any axis (default to XYYZ) 
    • True 4 axis motion XYZA 
  • Selectable limit switch voltage (5V or 24v)

Use the CNC XPRO to drive:

  • 3 Axis CNC Mill With Dual Drive Motors
  • 4 Axis CNC Mill with Rotary Table
  • Laser Cutter With XY, and Z motion
  • Plasma Cutter 
  • Pick and Place for SMD components
  • Camera Sliders
  • and Much More!


The xPRO comes fully assembled and programmed so all you need to do is wire up your motors and start cutting!  The xPRO V5 is defaulted to support dual Y machines, or XYYZ, machines with motor current of 2.8A.  

From the computer side we have found that CNCjs Desktop  is amazing and packed with great features! (open source / free download). 

For designing parts here at Spark Concepts we use the following stacks:

For mechanical parts (think gantry plates, mounts, boxes, etc):

  • Fusion 360 (both CAD design and CAM, includes GRBL postprocesser by default) (free for hobbyists)
  • XPRO V5 WebUI (or CNCjs for USB mode (free/opensource))

For artwork (think signs, drawings, plaques, awards, etc):

  • Vetric Vcarve or Aspire  depending on design (drawing and CAM, includes GRBL postprocessor) (paid)
  • XPRO V5 WebUI (or CNCjs for USB mode (free/opensource)) 


Note: The xPRO V5 runs a 32bit port of the GRBL. As such, the xPRO V5 can be used with most current GRBL senders and post-processors.


For user guides, hook-up instructions and all other documentation please check out the CNC xPRO V5 Github repository.


11 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Charles on 11th Dec 2020

    Ease of use is amazing however if your looking for documentation check

  • 5
    Well built

    Posted by Zach on 23rd Nov 2020

    Upgraded from the old xpro v3. Solid little unit that is built for everything. I do wish it came with some documentation on it, although I found what I needed on github. Great product